Nova 1570
Dielectric Twist Fabricator
Features:
- Meets NEMA Specifications
- Ball Bearing Shaft Support
- 150 Twists Per Minute
- 3/8” chuck
- IEC Peel Test Fixture
- Test Magnet Wire Sizes:
12 AWG to 44 AWG
(2 mm to 0.0.5 mm)
(Optional) IEC Peel Test Fixture
The NOVA 1570 Twist Fabricator makes twisted specimen pairs according to NEMA-1000, JIS and IEC specifications. The Dielectric Twist Fabricator consistently provides the exact number of twists and tensions on twisted pair samples for dielectric strength, voltage endurance, and thermal aging testing. The tester has a twist paddle that accommodates wire sizes from 12 AWG to 44 AWG (2 mm - 0.05mm). The motor rotates the twist paddle at a speed of up to 150 revolutions (twists) per minute. A pre-settable counter shows the number of twists selected and automatically stops the motor when the correct numbers of twist have been performed. The chuck mounted on the left side of the unit can be use for winding helical coil for heat shock test to a predetermined number of turns. The tester will also perform IEC peel test.
Helical Coil Winder |
Twisted Pair Clamp |
©2008 Ampac International, Inc. All rights reserved.